Shop LiFePO4 Batteries for Solar, Off-Grid, and Home Backup
Your battery bank decides how long the lights stay on after the sun sets or the grid goes down. We carry LiFePO4 batteries from EG4, Pytes, Epoch, Victron, Fortress Power, BigBattery, and more, from 12V RV batteries to 48V server rack and wall mount banks for whole-home backup.
Pytes V5 61.44kWh Battery Bundle, 12x V5 Batteries and 12-Slot Rack with Connecting Components
The largest 48V battery bundle on Current Connected
Fortress Power eBoost 16 + eWay Bundle, 48V 16kWh LiFePO4 Battery with Wire Management System, Optional 750A Busbar, 314Ah, IP65, UL 1973 & UL 9540
16kWh of storage with a built-in wireway to keep wiring clean
Fortress Power eForce 48V Stackable LiFePO4 Battery, 9.6kWh Per Module, IP65 Heated Enclosure, Quick-Plug Installation, Up to 153kWh Scalable
Stackable, easy to wire and natively pairs with Fortress Power inverters
BigBattery ETHOS 48V 10.24kWh 200Ah Stackable Lithium Battery System, 2x Battery Modules and Control Box, Includes Interconnecting Wires
Two stackable modules give you 10.24kWh to startAsk About This
BigBattery 12V HUSKY 2 INV 400Ah 5.12kWh Lithium Battery, Mobile Friendly LiFePO4 Energy Storage
BigBattery's 12V Lithium Battery for all your mobile adventuresAsk About This
BigBattery 24V HUSKY 2 INV 5.12kWh 200Ah LiFePO4 Battery, Mobile and Off-Grid Lithium Battery Energy Storage
BigBattery's 24V 200Ah mobile-friendly battery can parallel up to 16 units for 81.92kWhAsk About This
Eneramp Endurance 5 25.6kWh Lithium UL 1973 Battery Bundle with Battery Rack, 5x Endurance 5 48V 5.12kWh Batteries with 5-Slot Battery Rack
Eneramp's Launch Bundle with 50% off an Eneramp Server Battery Rack in this kit only!
EG4 LL-S V2 48V 100Ah 5.12kWh LiFePO4 Server Rack Battery, UL 1973 Listed, UL 9540A Tested
EG4's UL listed server rack battery, ready to stackAsk About This
EG4 LifePower4 V2 48V 100Ah 5.12kWh LiFePO4 Server Rack Battery, UL 1973 Listed, UL 9540A Tested Lithium Battery
Budget friendly version server-rack battery, cross-compatible with EG4-LLAsk About This
Pytes E-Box 48100R 100Ah 5.12kWh Server Rack Battery, UL 1973 & UL 9540 Lithium Battery
UL 9540 certified and scalable all the way to 491.5kWhNewer Version Available
Victron Energy 12.8V Lithium NG LiFePO4 Battery, Available in 100Ah, 200Ah, or 300Ah Capacities, Stackable up to 50 Batteries
Smart 12.8V lithium with a built-in BMS that scales to 192kWh
Sol-Max (formerly MNP) MNPowerflo5 48V 100Ah 5.12kWh LiFePO4 Server Rack Battery, UL 1973 & UL 9540 Lithium Battery
MidNite's own server rack battery for ESS buildsAsk About This
How to Choose a LiFePO4 Battery
1. Match Your Battery Voltage
Start with the Battery Voltage filter, because your battery has to match your inverter or charge controller. 12V batteries suit RVs, vans, boats, and small cabins. 24V works well for mid-size cabins and mobile systems. 48V is the standard for whole-home backup and residential solar, and HVDC (300V+) batteries pair with high-voltage commercial inverters. Wiring batteries in series or parallel changes your bank’s voltage or capacity, so plan the layout before you buy.
2. Pick a Form Factor
The Form Factor filter sorts batteries by how they install. 19" EIA server rack batteries slide into a standard rack and make it easy to grow a 48V bank one module at a time. Wall mount batteries save floor space in a garage or utility room. Group size batteries (Group 24, 27, 8D, and GC2) drop into the same trays as lead-acid batteries in RVs, boats, and golf carts, and standalone units sit on the floor as their own cabinet.
3. Size Your Capacity
Use the Capacity (Amp-Hours) filter to compare storage. Multiply amp-hours by voltage to get watt-hours: a 48V 100Ah server rack battery (51.2V nominal) stores about 5.12kWh, and a 12V 100Ah battery stores about 1.28kWh. Add up the loads you want to run and how many hours you need them, then leave some headroom. Our guide to how many batteries you need walks through the math, and your utility bill tells you how much energy you use each day.
4. Choose a Brand That Talks to Your Inverter
Use the Brand filter to stay compatible. Many of our batteries support closed-loop communication over CAN or RS485, so the battery’s BMS can tell the inverter exactly how to charge it. Check your inverter’s approved battery list before you buy, and pick up the matching communication cables.
5. Plan Racks, Cables, and Protection
Server rack batteries need a rack or cabinet, and you’ll find racks, cabinets, and mounting brackets right here. Every bank also needs properly sized cables, busbars, and overcurrent protection between the battery and the inverter, so shop DC fuses, breakers, and battery cables and add a battery monitor to track state of charge. Your battery and inverter manuals list the recommended cable and fuse sizes. If your battery ever reads 100% and then shuts down early, here’s why that happens.
LiFePO4 Battery FAQ
LiFePO4 batteries last thousands of cycles, can use most of their rated capacity without damage, weigh a fraction of a comparable lead-acid bank, and never need watering or equalizing. LiFePO4 is also one of the most thermally stable lithium chemistries.
Add up the watts of the loads you want to keep running, multiply by the hours you need them, and compare that to each battery’s capacity. For example, running 1,000W of essential loads for 10 hours takes about 10kWh, or about two 48V 100Ah server rack batteries. Our team is happy to answer product questions as you plan.
It’s best not to. Batteries in one bank should match in brand, model, capacity, and age so they share the load evenly and their BMSs can communicate. If you’re expanding an older bank, check with the manufacturer before pairing new modules with existing ones.
Not on their own. Charging LiFePO4 cells below freezing can damage them, so most BMSs block charging in the cold. If your batteries live in an unheated garage, shed, or RV, look for self-heating models that warm the cells before charging.
UL 1973 is the safety standard for the battery itself. UL 9540 covers a complete energy storage system, and UL 9540A is a fire propagation test. Many permitting offices ask for these listings on home installations, so check with your local authority before you buy.
If the BMS shut the battery off after a deep discharge, it usually needs a charger with a lithium wake-up mode or a short boost to come back. Here’s how to wake a sleeping LiFePO4 battery.