Shop Pure Copper Battery Cables and Lugs
Undersized or poorly crimped cable is one of the most common reasons a battery system runs hot or underperforms. Our battery cables use fine-stranded pure copper with lugs crimped on a 10-ton hydraulic press, in every common gauge from 6 AWG to 4/0. Build a custom cable to your exact length and lug size, grab a ready-made set for your battery, or pick up a cable and lug kit to crimp your own.
Not sure what gauge you need? The sizing table below the products matches each gauge to inverter size.

Custom Battery Cables, Built to Order in Our Shop
Tell us the gauge, length, jacket color, and lug for each end, and we crimp your cables to order in our own facility. Every cable gets super flexible pure copper, tin coated lugs, and glue lined heat shrink on every termination, so it goes in clean and stays put. It is the easiest way to get cables that fit your system exactly.
Design Your Cables
Pick your gauge, color, length, and lugs, with live pricing.
Ready-Made Cables, Kits, and Lugs



EG4 WallMount Battery Cable Connector, Degson Connector, Polarity-Keyed for EG4 280Ah and 314Ah WallMount Batteries
EG4 WallMount connectors to create custom cables


EG4 Battery Parallel Connection Cables for EG4 WallMount 48V Lithium Batteries
Designed specifically for the EG4 WallMount line of batteries!
Pure Copper Battery Cable & Lug Bundle - 2 AWG
Build your own cables with this pure copper welding cable!
Pure Copper Battery Cable & Lug Bundle - 1/0 AWG (0 AWG)
Build your own cables with this pure copper welding cable!
Pure Copper Battery Cable & Lug Bundle - 2/0 AWG
Build your own cables with this pure copper welding cable!
Pure Copper Battery Cable & Lug Bundle - 4/0 AWG
Build your own cables with this pure copper welding cable!What Size Battery Cable Do You Need?
6 AWG
Up to 750W
Up to 1,500W
Up to 3,000W
4 AWG
Up to 1,000W
Up to 2,000W
Up to 4,000W
2 AWG
Up to 1,800W
Up to 3,600W
Up to 5,400W
1/0 AWG
Up to 2,000W
Up to 4,000W
Up to 8,000W
2/0 AWG
Up to 2,500W
Up to 5,000W
Up to 10,000W
4/0 AWG
Up to 4,000W
Up to 8,000W
Up to 16,000W
These recommendations assume a short run between the battery and inverter. Longer runs need a heavier gauge to keep voltage drop in check. Running a longer cable or a bigger system? Contact our support team and we’ll help you pick the right gauge.
Custom built or crimp your own
The custom battery cable builder lets you choose the gauge, length, jacket color, and lug for each end, and we crimp it to order in our facility. If you have the tools, our cable and lug kits pair red and black Power-Flex cable in lengths from 5 to 80 feet with matching 5/16 or 3/8 inch lugs, so you can crimp your own.
Match the lug to the stud
Ring lugs are sized by both the cable gauge and the stud they bolt onto. Batteries, bus bars, and inverters use different stud sizes, so check both ends before you order.
Battery Cable FAQ
Based on the sizing table above, a 3000W inverter calls for 4/0 on a 12V system, 2 AWG on 24V, and 6 AWG on 48V for short runs. Longer runs need a heavier gauge. Contact our support team and we’ll help you size it.
4/0 is the larger cable. It carries more current with less voltage drop, so it suits bigger inverters and longer runs. As a starting point, 2/0 handles inverters up to 2,500W at 12V and 4/0 handles up to 4,000W at 12V.
Yes. The custom battery cable builder lets you choose the gauge, length, jacket color, and lug for each end, and we crimp the cable for you.
Pure copper carries more current and handles heat better than copper clad aluminum (CCA), which needs a larger size to do the same job. Our custom cables and cable kits use fine-stranded pure copper.
Yes. Every positive battery cable should be protected by a fuse sized to the cable and placed as close to the battery as you can. Our battery fuses page compares Class T, MRBF, and MEGA options.






