eduardoglezhdez4 June 2025
seems very good
Customizable Victron 6kVA 120/240V Split Phase Off-Grid Power System
Product Summary
Experience off-grid living with our 6kVA 120/240V Off-Grid Power System. Equipped with a pair of the impressive Victron MultiPlus-II 3kVA Inverter/Chargers, this system allows you to operate essential appliances and equipment effortlessly, including high-power devices like well pumps and air conditioners. Moreover, with an impressive surge capacity of 12kVA, you can confidently supply your home with electricity even during peak demand periods. Our modular system design also ensures easy expansion as your requirements grow. If you're ready to free yourself from the grid, our 6kVA Off-Grid Power System is the ideal choice for you!
- 6,000VA Continuous output @ 25°C
- 12,000VA Peak output
- Preconfigured for 120/240V Split Phase Output
- Modular - Additional inverters can be added for increased output
- Built in generator transfer switch
- PowerAssist - Prevent overloads and increase output when using limited generator input
- Industry leading ultra efficient transformer based design, 96% efficient.
- Current Connected's US based customer service and warranty support
$7,512.79
$7,512.79
Log in to check member price and detailed stock information.
$7,512.79
Configure Your System
Inverter / Charger (x2)
RequiredProduct Details
Victron Energy MultiPlus-II 48V 3kVA 120V AC Output, 35A Battery Charger, UL 1741 Residential Low Frequency Inverter-Charger
The MultiPlus-II 48V 3kVA is a pure sine wave inverter/charger that delivers 2400W continuous (5500W surge), charges batteries at up to 35A, and transfers to battery backup in under 20 milliseconds. UL 1741 certified for residential installations, it runs grid-tied ESS, off-grid, and backup configurations through a single unit. Two units pair for 120/240V split phase output, and up to six can be paralleled per phase. Systems purchased through Current Connected ship pre-programmed with your specified firmware and phase configuration.
Specifications:
- Continuous Output: 2400W (3000VA) at 25°C
- Surge Output: 5500W
- Inverter Efficiency: 95%
- Idle Consumption: 11W (7W in AES mode, 2W in search mode)
- AC Input: 90-140V, 45-65 Hz, 50A transfer switch
- AC Output: 120V, two outputs (main: uninterruptible, auxiliary: grid-only)
- DC Input Range: 38-66V (48V nominal)
- Battery Charger: 35A maximum, adaptive 4-stage
- Transfer Time: <20 ms (uninterruptible for computers and electronics)
- Certifications: UL 1741, CSA C22.2 No. 107.1, UL 458
$1,168.75
Qty: 2| Need more than what's available? Tell us what you need and we can source it for you. |
Component subtotal:
$2,337.50
Solar Charge Controller
OptionalChoose Solar Charge Controller
Product Details
Victron Energy SmartSolar MPPT 150V, MPPT 250V TR VE.Can Charge Controller for Lithium and Lead-Acid Batteries
The Victron SmartSolar MPPT VE.Can charge controller converts solar panel voltage to the optimal charging voltage for 12V, 24V, or 48V battery banks at up to 98% efficiency. Available in 150V and 250V maximum PV input configurations with 70A, 85A, or 100A charge current output, with VE.Can ports for daisy-chaining up to 25 units.
Features:
- PV Array Voltage Compatibility: 150V or 250V Voc
- Battery Bank Voltage Compatibility: 12V, 24V, 48V
- Charging Current: Ranging from 70A to 100A (model-dependent)
- Programmable for lead-acid, lithium, and other chemistries
- CAN bus ports for seamless unit synchronization and data transmission
- Bluetooth connectivity via the VictronConnect App
- Remote Monitoring: Victron Remote Management Portal (VRM) with internet connection or GlobalLink 520 for remote installations without internet access
- VE.Direct port for single-unit monitoring or streetlight control
- UL 1741 Listed
Recommended Accessories: SmartSolar Control Display or MPPT Control Display for enhanced monitoring and control
Loading options...
Battery Bank
OptionalChoose Battery Bank
About this kit
This ECO-WORTHY bundle includes six ECO-WORTHY 48V 100Ah server rack batteries with an ECO-WORTHY 6-Slot Battery Rack! The Battery Rack is designed to hold six ECO-WORTHY server rack batteries, and it includes busbars to make paralleling easy.
What's Included
Included
Included
Component subtotal:
$5,599.93
DC Power Distribution System
RequiredWhat's Included
Included
Included
Included
Component subtotal:
$746.14
GX System Controller
RequiredChoose GX System Controller*
About this kit
The Cerbo GX and GX Touch combination sets a new standard for professional-grade control, allowing you to take control and monitor your system with confidence and efficiency. The Cerbo-GX is a pi-based computer that connects to each component of your system and monitors every single aspect. With the data collected, a complete power-flow chart is sent out to the GX Touch display for you to view and scroll through the various data points. The Cerbo-GX also facilitates connecting the system to the internet via WiFi, Ethernet or 4G (accessory required), giving you full monitoring and control from anywhere in the world.
What's Included
Included
Included
Component subtotal:
$493.00
Fuses for Inverters
RequiredThese MegaFuses are to be installed in the Lynx Distributor. For 24v systems, please select a 125A fuse - 48v systems will need an 80A fuse. You will need a minimum of two fuses, however, we recommend to purchase / keep two additional fuses as spares as a best practice.
Product Details
Littelfuse MEGA Fuse 60A-350A, 2 Pack, Suitable for 12V/24V/48V Battery Systems, 2.5kAIC at 70Vdc
Specifications:
- Pack of two (2) fuses – always good to keep a spare
- Rated for 70Vdc – compatible with 12V, 24V, and 48V systems
- 60A to 350A options available
- Compatible with the MEGA Fuse Holder and Victron Lynx Distributor.
- Interruption rating: 2500A @ 70Vdc
- 1MΩ open state resistance @ 100V
- Manufactured by LittelFuse
Loading options...
RJ45 / VE.BUS Cable from Inverters to Cerbo-GX
RequiredThis cable is a standard network cable and will be connected from the VE.BUS port on the Cerbo-GX to the VE.BUS port on each inverter. The most common choice for this cable is 6ft.
Product Details
RJ45/CAT5e Ethernet Patch Cables from 1ft to 25ft, Communication and Data Cables for Energy Systems
Specifications:
- High-precision, CAT5e, ANSI/TIA-568-C.2 Compliant, ETL Verified
- UTP 24AWG stranded conductors for flexibility and minimum crosstalk
- 50-micron gold-plated contacts for high-speed data transfer and corrosion resistance
- Molded, snag-less strain relief boots for long-lasting, durable connections
- Compatible with Victron VE.Bus / VE.Can products
Loading options...
Qty: 2
Kit Summary
| Component | Selection | Qty | Subtotal |
|---|---|---|---|
| — | 0 | $0.00 | |
| Excluded | Not included | 0 | — |
| Excluded | Not included | 0 | — |
| — | 0 | $0.00 | |
| — | 0 | $0.00 | |
| — | $0.00 | ||
| — | 0 | $0.00 | |
| Total | $0.00 | ||
—
0
$0.00Not included
0
—Not included
0
——
0
$0.00—
0
$0.00—
$0.00
—
0
$0.00Total
Finish choosing your options above to continue.
Log in to check member pricing and detailed stock information.
Customer Reviews
(1)5.0