SKU: Please select an option...
Victron charge controllers maximize solar energy harvest with MPPT and convert power for battery charging. Multiple features protect the battery, including automatic switch capability between charge states and configurable settings to ensure consistent charging.
Specifications:
Please contact the Current Connected sales team for assistance selecting the correct charge controller size.
Log in to check member price and detailed stock information.
Please select all options above to add to cart.
Current Connected is YOUR Victron product specialist
Victron’s array of VE.Direct SmartSolar Charge Controllers includes options for nearly any size of solar system. Select from a maximum charging amperage range of 13-60A and maximum solar input voltage range of 75-250V for a 12V, 24V, or 48V system.
Regardless of size, the charge controller constantly monitors solar production with MPPT (Maximum Power Point Tracking) technology. If production drops due to clouds or other obstructions, the charge controller adjusts the voltage and amperage levels and maximizes production.
The SmartSolar Charge Controllers send incoming power to either the battery or to connected loads. It’s possible to configure these charge controllers to monitor the battery and activate a load when the batteries reach a set voltage or SOC (State of Charge %). This maximizes energy harvest from the solar panels.
Different sized charge controllers handle loads differently. The charge controllers smaller than the 100/30 have load terminals that can connect directly to the load circuit. The charge controllers 100/30 and larger utilize a VE.Direct TX cable to send an on-off signal to an external device but do not power it directly.
The Virtual Load and Battery Life features monitor the battery voltage levels to maintain battery health. If too much power is directed to loads instead of the batteries, the batteries cannot reach full charge. When this happens too often, the Virtual Load and Battery Life features deactivate loads so the batteries can fully charge at least once a week.
The VictronConnect app controls Battery Life and other basic charge controller settings. Use a smartphone or tablet with Bluetooth to access VictronConnect during initial setup and for local monitoring and maintenance.
The addition of a Cerbo GX provides advanced customization and automation options, and connection to the Cerbo GX enables customization from anywhere in the world through the VRM (Victron Remote Management).
Choose Victron’s SmartSolar Charge Controller with VE.Direct communication for almost any size solar system.
bought this controller for my RV to expand my solar footprint on the roof. I have 3 - 220W 12V panels in series connected to this controller and it is working in tandem with a 150/70 controller via DVCC on my Cerbo GX. all is working perfectly so far.
This Victron charge controller is replacing a Renogy 40 amp charge controller. I built a small system in my work shop where I use the charge controller. I haven't had the Victron in service very long yet, but so far I like it. The controller was very easy to set up and use. I have a Victron shunt for my house system and like the fact I use the same app to connect to either one. Hopefully this year I will have Victron chargers for my house system.
