IntegraRack IR-35A Solar Panel Ground Mount Bracket – Adjustable Angle (Individual Frame)

SKU: IR-35AF1035

The IntegraRack IR-35A is a scalable, DIY-friendly racking system for any size solar array.  These racks can be secured with innovative anchoring systems such as EarthBallast, AnchorSpike, Concrete anchors,  or even concrete curb stops or low-profile water tanks – installation has never been easier!

  • No earth augers, concrete piles, or post ponding required
  • Each frame is laser-cut from high-grade aluminum, and secures to panels with stainless-steel hardware
  • Compatible with any full-size (300W+) solar module without any modification to the module
  • Adjustable mounting angle from 15 to 35 degrees in 2.5 degree increments.  Also available in fixed versions at 15 degrees, 30 degrees, 45 degrees.
  • Ships in a compact box via ground parcel transport – no need for expensive freight deliveries
  • When purchasing these mount, you will require one more mount then the solar panels you need (Ex: 4 panels, 5 mounts)
  • The price shown is for one individual frame

$139.99

Log in to check member price

26 in stock (Accepting backorders for additional units.)

Description

IntegraRack IR-35A BallastRack™ Solar Module Racking System

The IR-35A is the fastest and easiest ground mounting system available and allows for modules of any size to be racked and adjusted from 15°-35° for optimal year-round energy production. This system can be mounted almost anywhere with its four available mounting options and is strong enough to withstand wind speeds of up to 200 miles per hour. The IR-35A is also the lowest cost per kW option on the market, with only one IR-35A Frame needed per solar module after starting the row, and no pouring of concrete footings required. The minimal and modular design allows for good airflow behind the solar panels to optimize efficiency and avoid energy heat loss common with plastic bin type products.

– Fast Assembly & Install

  • 2-minute assembly per IR-35A Frame
  • Installation as fast as 10 minutes per module
  • No earth augers, no concrete, and no post ponding required
  • Only one main frame component is required between each solar module to complete the entire ground mount system

– Universal Mounting

Four Mounting Options:

  • IR EarthBallast™ Kit – Uses fast-setting epoxy to adhere geotextile material to IR-35A Frames and earth fillover for a fast-ballasted system
  • IR AnchorSpike™ Kit – Mount IR-35A Frames by clamping the base tubes around specially designed anchor spikes that provide easy off-the-ground leveling
  • Concrete Lag Bolt Kit – Bolt the IR-35A Frames directly to any concrete surface (concrete pad, footings, or patios)
  • Base Ballasting – Hold IR-35A Frames in place using flat water tanks or concrete curb stops

– Most Cost Effective Ground Mounted Solar System

  • One of the lowest cost per kW ground mount racking systems on the market
  • Traditional ground mount solar racking systems take 6x longer to install and are much more labor-intensive
  • Capable of racking modules of up to 700 Watts

– High-Strength Engineered & Tested

  • Extensively engineered and outdoor lab tested with simulated real-world wind and snow load conditions
  • Build entirely from aircraft grade 6061 T6 aluminum with stainless steel mounting brackets
  • Capable of withstanding up to wind loads of up to 200 mph and snow loads of up to 100 pounds per sq ft (click manufacturers resources link below for detailed Datasheets)
  • A strong, simple “U” shaped design provides amazing strength

– Unprecedented Versatility

  • Fixed 35A° angle for optimal year-round energy production and excellent snow-shedding capabilities
  • Up to 2 feet of ground clearance
  • Adjustable solar module height
  • Portrait solar module mounting for easy wiring
  • The Base Tubes of each IR-35A Frame are designed to clamp around and bite into IR AnchorSpikes or concrete stakes for easy leveling and increased hold-down strength.

– Included Hardware:

  • (1) IR-35A Base Tube
  • (1) IR-35A Long Leg
  • (1) IR-35A Short Leg
  • (4) 5/16″-18 x 3.5″ Carriage Bolts
  • (4) IR-F2 Flange Clamp Bonding Brackets
  • (4) 5/16″-18 x 2.5″ Carriage Bolts
  • (8) 5/16″-18 Serrated Nuts
  • (4) 5/16″-18 x 5/8″ Thread Cutting Bolts

Additional Components Required For Some Mounting Configurations

1-inch EMT/Conduit Pipe (required for certain mounting options)

  • 1-inch EMT adds racking strength and helps with positioning for module spacing.
  • 10-foot-long Conduit Pipes can be sourced locally (Home Depot, Lowes, Electrical Hardware Store, Etc.).

Recommended Accessories:

Reviews

There are no reviews yet.

Be the first to review “IntegraRack IR-35A Solar Panel Ground Mount Bracket – Adjustable Angle (Individual Frame)”

Please login to post questions