EG4 BOSSBox is a freestanding epoxy-coated Q235 steel enclosure. The cabinet is designed to house three EG4 WallMount All Weather 280Ah batteries on the interior and accommodate up to two EG4 Hybrid Inverters (such as the 12kPV, 18kPV, FlexBOSS18, or FlexBOSS21) in any combination to be mounted on the exterior of the box.
When fully loaded, the BOSSBox can act as a ready-to-use deployable power solution for construction sites, off-grid projects, and even disaster relief applications. It does not require fuel to operate, and is far quieter than a generator. As a long-term power solution, it can be grid-tied for whole-home battery back-up or tied to a solar system for full-time power generation.
The BOSSBox was engineered with a plug-and-play design to remove some of the complexities of power installation systems. No drilling, cutting, or wall-mounts are required. The BOSSBox is especially useful when cutting into delicate surfaces, facades with low structural integrity, or other challenging surfaces.
Eg4 has designed the base similarly to a pallet and it has built-in anchoring brackets. The design enables forklift forks or equivalent equipment to transport the cabinet. The built-in brackets have 12 mm holes that will allow anchoring to concrete foundations or flat exterior terrain using the included M12 hardware or ⅜ inch equivalent anchors.
The BOSSBox is a NEMA 3R enclosure. This means it will keep rain, falling dirt, and ice formation off the EG4 Outdoor Wallmount Batteries installed within. The cabinet is also corrosion-resistant so it can be used near the ocean long term. Because EG4’s outdoor batteries are heated, the system can work unhindered at below-freezing conditions for months.
The durable steel construction is built to stand alone without supporting assemblies to maintain structural integrity. The BOSSBox is also designed with passive cooling with air intake vents at the front of the cabinet and heat vents all around the top. No fans are required. However, in hotter climates, a shade or covering is advised.
Anchor points are provided throughout to facilitate easy and intuitive cable management. The BOSSBox comes with one BOSSBox cable kit. If you are adding a second inverter or multiple batteries, you will need to purchase additional cables separately.
