eduardoglezhdez4 June 2025
seems very good
Customizable Victron 6kVA 120/240V Split Phase Off-Grid Power System
Product Summary
Experience off-grid living with our 6kVA 120/240V Off-Grid Power System. Equipped with a pair of the impressive Victron MultiPlus-II 3kVA Inverter/Chargers, this system allows you to operate essential appliances and equipment effortlessly, including high-power devices like well pumps and air conditioners. Moreover, with an impressive surge capacity of 12kVA, you can confidently supply your home with electricity even during peak demand periods. Our modular system design also ensures easy expansion as your requirements grow. If you're ready to free yourself from the grid, our 6kVA Off-Grid Power System is the ideal choice for you!
- 6,000VA Continuous output @ 25°C
- 12,000VA Peak output
- Preconfigured for 120/240V Split Phase Output
- Modular - Additional inverters can be added for increased output
- Built in generator transfer switch
- PowerAssist - Prevent overloads and increase output when using limited generator input
- Industry leading ultra efficient transformer based design, 96% efficient.
- Current Connected's US based customer service and warranty support
$3,778.59
$3,778.59
Log in to check member price and detailed stock information.
$3,778.59
Configure Your System
Inverter / Charger (x2)
RequiredChoose Inverter / Charger (x2)*
Product Details
Victron Energy MultiPlus-II 48V 3kVA 120V AC Output, 35A Battery Charger, UL 1741 Residential Low Frequency Inverter-Charger
The MultiPlus-II 48V 3kVA is a pure sine wave inverter/charger that delivers 2400W continuous (5500W surge), charges batteries at up to 35A, and transfers to battery backup in under 20 milliseconds. UL 1741 certified for residential installations, it runs grid-tied ESS, off-grid, and backup configurations through a single unit. Two units pair for 120/240V split phase output, and up to six can be paralleled per phase. Systems purchased through Current Connected ship pre-programmed with your specified firmware and phase configuration.
Specifications:
- Continuous Output: 2400W (3000VA) at 25°C
- Surge Output: 5500W
- Inverter Efficiency: 95%
- Idle Consumption: 11W (7W in AES mode, 2W in search mode)
- AC Input: 90-140V, 45-65 Hz, 50A transfer switch
- AC Output: 120V, two outputs (main: uninterruptible, auxiliary: grid-only)
- DC Input Range: 38-66V (48V nominal)
- Battery Charger: 35A maximum, adaptive 4-stage
- Transfer Time: <20 ms (uninterruptible for computers and electronics)
- Certifications: UL 1741, CSA C22.2 No. 107.1, UL 458
$1,168.75
Qty: 2| Need more than what's available? Tell us what you need and we can source it for you. |
Component subtotal:
$2,337.50
Solar Charge Controller
OptionalChoose Solar Charge Controller
Product Details
Victron Energy SmartSolar MPPT 150V, MPPT 250V TR VE.Can Charge Controller for Lithium and Lead-Acid Batteries
The Victron SmartSolar MPPT VE.Can charge controller converts solar panel voltage to the optimal charging voltage for 12V, 24V, or 48V battery banks at up to 98% efficiency. Available in 150V and 250V maximum PV input configurations with 70A, 85A, or 100A charge current output, with VE.Can ports for daisy-chaining up to 25 units.
Features:
- PV Array Voltage Compatibility: 150V or 250V Voc
- Battery Bank Voltage Compatibility: 12V, 24V, 48V
- Charging Current: Ranging from 70A to 100A (model-dependent)
- Programmable for lead-acid, lithium, and other chemistries
- CAN bus ports for seamless unit synchronization and data transmission
- Bluetooth connectivity via the VictronConnect App
- Remote Monitoring: Victron Remote Management Portal (VRM) with internet connection or GlobalLink 520 for remote installations without internet access
- VE.Direct port for single-unit monitoring or streetlight control
- UL 1741 Listed
Recommended Accessories: SmartSolar Control Display or MPPT Control Display for enhanced monitoring and control
Loading options...
Battery Bank
OptionalChoose Battery Bank
Loading bundle items...
Component subtotal:
$5,599.93
DC Power Distribution System
RequiredChoose DC Power Distribution System*
Loading bundle items...
Component subtotal:
$781.84
GX System Controller
RequiredChoose GX System Controller*
Loading bundle items...
Component subtotal:
$493.00
Inverter to Lynx Distributior Cables (48V)
RequiredThe inverter has an M8 (5/16") stud as does the Lynx Distributor, so please select a cable option with 5/16" lugs on both ends. Please note that it is critical the cables to each inverter be exactly identical length and gauge. We typically recommend at least 4ft cables for this connection, but your layout may necessitate longer cables.
Choose Inverter to Lynx Distributior Cables (48V)*
Product Details
4 AWG Pure Copper Battery Cables - Red & Black - 5/16" Ring Terminal Lugs
4 AWG Battery Cable Set
- Includes one black cable and one red cable
- 100% fine stranded PURE COPPER cable for high amperage applications
- Copper, tinned coated lugs
- Polyolefin glue-lined heat shrink tubing
- Cables are USA-made and assembled in-house utilizing a 6-point, 10 ton hydraulic press
- Other gauges, and completely customizable lug and length options available through our custom cable builder
Loading options...
Qty: 2
Fuses for Inverters
RequiredThese MegaFuses are to be installed in the Lynx Distributor. For 24v systems, please select a 125A fuse - 48v systems will need an 80A fuse. You will need a minimum of two fuses, however, we recommend to purchase / keep two additional fuses as spares as a best practice.
Choose Fuses for Inverters*
Product Details
Littelfuse MEGA Fuse 60A-350A, 2 Pack, Suitable for 12V/24V/48V Battery Systems, 2.5kAIC at 70Vdc
Specifications:
- Pack of two (2) fuses – always good to keep a spare
- Rated for 70Vdc – compatible with 12V, 24V, and 48V systems
- 60A to 350A options available
- Compatible with the MEGA Fuse Holder and Victron Lynx Distributor.
- Interruption rating: 2500A @ 70Vdc
- 1MΩ open state resistance @ 100V
- Manufactured by LittelFuse
Loading options...
RJ45 / VE.BUS Cable from Inverters to Cerbo-GX
RequiredThis cable is a standard network cable and will be connected from the VE.BUS port on the Cerbo-GX to the VE.BUS port on each inverter. The most common choice for this cable is 6ft.
Choose RJ45 / VE.BUS Cable from Inverters to Cerbo-GX*
Product Details
RJ45/CAT5e Ethernet Patch Cables from 1ft to 25ft, Communication and Data Cables for Energy Systems
Specifications:
- High-precision, CAT5e, ANSI/TIA-568-C.2 Compliant, ETL Verified
- UTP 24AWG stranded conductors for flexibility and minimum crosstalk
- 50-micron gold-plated contacts for high-speed data transfer and corrosion resistance
- Molded, snag-less strain relief boots for long-lasting, durable connections
- Compatible with Victron VE.Bus / VE.Can products
Loading options...
Qty: 2
Solar Controller to Lynx Distributor Cables
RequiredSince you selected a charge controller on its own rather than a complete bundle, you will need to select the appropriate cables, fuses, and communication cables to connect it into the system. Victron VE.CAN controllers will need a raw connection whereas MPPT RS controllers will need a 5/16" ring terminal. This cable will connect into the Lynx Distributor with a 5/16" ring terminal. Typically this cable is 4-5 FT, but you can extend or reduce your selection as needed.
Choose Solar Controller to Lynx Distributor Cables*
Product Details
2 AWG Pure Copper Battery Cables - Red and Black - 5/16" Ring Terminal Lugs
- Set includes one black cable and one red cable
- 100% fine stranded PURE COPPER cable for high amperage applications
- Copper, tinned coated lugs
- Polyolefin glue-lined heat shrink tubing
- Cables are USA-made and assembled in-house utilizing a 6-point, 10 ton hydraulic press
- Other gauges, and completely customizable lug and length options available through our custom cable builder
Loading options...
Fuse for Solar Controller
RequiredSince the controller is a continuous load, you must select a fuse one size up from the output current rating of the controller so that it is not blown during normal operation.
Choose Fuse for Solar Controller*
Product Details
Littelfuse MEGA Fuse 60A-350A, 2 Pack, Suitable for 12V/24V/48V Battery Systems, 2.5kAIC at 70Vdc
Specifications:
- Pack of two (2) fuses – always good to keep a spare
- Rated for 70Vdc – compatible with 12V, 24V, and 48V systems
- 60A to 350A options available
- Compatible with the MEGA Fuse Holder and Victron Lynx Distributor.
- Interruption rating: 2500A @ 70Vdc
- 1MΩ open state resistance @ 100V
- Manufactured by LittelFuse
Loading options...
RJ45 / VE.CAN Cable From Solar Controller to Cerbo-GX
RequiredChoose RJ45 / VE.CAN Cable From Solar Controller to Cerbo-GX*
Product Details
RJ45/CAT5e Ethernet Patch Cables from 1ft to 25ft, Communication and Data Cables for Energy Systems
Specifications:
- High-precision, CAT5e, ANSI/TIA-568-C.2 Compliant, ETL Verified
- UTP 24AWG stranded conductors for flexibility and minimum crosstalk
- 50-micron gold-plated contacts for high-speed data transfer and corrosion resistance
- Molded, snag-less strain relief boots for long-lasting, durable connections
- Compatible with Victron VE.Bus / VE.Can products
Loading options...
Kit Summary
| Component | Selection | Qty | Subtotal |
|---|---|---|---|
| — | 0 | $0.00 | |
| Excluded | Not included | 0 | — |
| Excluded | Not included | 0 | — |
| — | 0 | $0.00 | |
| — | 0 | $0.00 | |
| — | 0 | $0.00 | |
| — | $0.00 | ||
| — | 0 | $0.00 | |
| — | 0 | $0.00 | |
| — | $0.00 | ||
| — | 0 | $0.00 | |
| Total | $0.00 | ||
—
0
$0.00Not included
0
—Not included
0
——
0
$0.00—
0
$0.00—
0
$0.00—
$0.00
—
0
$0.00—
0
$0.00—
$0.00
—
0
$0.00Total
Log in to check member pricing and detailed stock information.
Customer Reviews
(1)5.0