The Patriotic Power Kit, Inverter and Batteries for Mobile or Residential Off-Grid Power

The inverter is the part of the system that takes DC power from batteries and converts it to AC power, which is used to give appliances and electronics the energy they need to work.

The Rosie 7048 is a 120/240Vac inverter, meaning it can power both legs of a residential electrical panel, which is needed for larger appliances like dryers, ovens, and A/C units.

The Little Rosie (available for either mobile applications or residential applications) is a 120Vac inverter, which is able to power any other appliance that uses a standard wall outlet plug (5-15P).

Which product do I need? If you're going to need more than 3,600W of power at any given time, it would be best to get the Rosie 7048. Not only does this have twice as much power as a Little Rosie, you can parallel 2 units for up to 14,000W continuous and up to 28,000W (2x60A @ 120/240Vac) surge capacity for nearly 60 seconds!

If you only need a single leg of power, the Little Rosie can be your companion for years to come. It doesn't have the ability to parallel, but it's surge capacity is impressive!

This AC/DC e-panel provides breakers in an enclosure designed to sit flush against the Rosie. It includes a 300A battery breaker, 60A AC-in and AC-out breakers, and additional space for PV breakers for adding on a charge controller!

This AC/DC e-panel provides breakers in an enclosure designed to sit flush against the Little Rosie. It includes a 125A battery breaker, a 30A AC-in breaker, and a 60A AC-out breaker, along with additional space for PV breakers to add on a charge controller!

The batteries are the part of the system that store energy for the inverter to use as needed to power appliances and loads.

Choose between the Endurance 5 batteries individually (5.12kWh of capacity each) and the Endurance 5 Bundle that includes 5x Endurance 5 lithium batteries (25.6kWh capacity total), a 5-slot battery rack, and the Eneramp flexible busbars for paralleling the batteries.

Which product should I choose? If you already have plans for racking and interconnections, you can go with the individual batteries and choose your preferred quantity. If you need a quick assembly of necessary components, choose the bundle! The battery rack is 50% off in the bundle, and you can still choose your preferred quantity of batteries in sets of 5. The included flexible busbars can carry up to 454A of current continuously, making them ideal for large or small battery banks.

We chose 1/0 AWG cable to go from the batteries to the Rosie based off its continuous rated output. This is optional, in case you already have a set of battery cable to use.

We chose 2 AWG cable to go from the batteries to the Little Rosie based off its continuous rated output. This is optional, in case you already have a set of battery cable to use.