Description

Wera 7440/41/42 Kraftform Torque Screwdriver Set 0.3-6.0Nm Overview

When precision tightening matters, the Wera 7440/41/42 Kraftform Torque Screwdriver Set delivers accuracy, versatility, and durability in a single, thoughtfully organized 27-piece kit. This professional-grade adjustable torque screwdriver set covers the torque range of 0.3Nm to 6.0Nm across three dedicated drivers, giving installers and technicians the right tool for every fastener. Whether you’re securing terminal blocks, mounting inverter hardware, or torquing battery connectors to spec, this set is built to reliably provide the correct torque the first time.

Key Features of the Wera 7440/41/42 Kraftform Torque Screwdriver Set

Three-Driver Coverage Across the Full Range: The set includes three distinct torque drivers: the 7440 (0.3–1.2Nm), 7441 (1.2–3.0Nm), and the 7442 pistol-handle driver (3.0–6.0Nm). This way, you’re never stretching the low end or overloading the high end of a single tool. Each driver is purpose-matched to its torque range for maximum accuracy.

±6% Measurement Accuracy to DIN EN ISO 6789: These aren’t estimated torque tools. Each adjustable torque screwdriver in this set meets the rigorous DIN EN ISO 6789 international standard for torque tools, with a measurement accuracy of ±6%. An audible and physical signal alerts you when you reach the pre-set torque value, protecting sensitive components from over-tightening.

Rapidaptor Quick-Release Bit Chuck: Wera’s Rapidaptor technology enables one-handed bit changes without moving the sleeve. The bit seats automatically and securely locks when it contacts the fastener. To remove, simply push the sleeve forward. The spring mechanism lifts the bit off the magnet for easy bit extraction.

Unlimited Torque for Loosening Seized Fasteners: Unlike fixed-torque tools, this adjustable torque screwdriver set allows unlimited torque in reverse, so you can break loose seized screws without switching tools or potentially damaging the mechanism.

Comprehensive Bit Assortment: The set ships with 24 bits including TORX (T6-T30), TORX Plus (6 IP-30 IP), and Hex-Plus (2-6mm metric) profiles, all 25mm long with 1/4″ hex shank compatibility. The bits come in a high-quality, stable plastic case with dedicated bit organization.

Ideal Applications for Adjustable Torque Screwdrivers

An adjustable torque screwdriver is essential to prevent electrical hazards caused by over-torquing or under-torquing. Use the Wera 7440/41/42 in a broad range of precision work environments:

• Solar Panel Installation: Grounding lugs, rail splice connectors, and frame mounting hardware all require specific torque values to meet manufacturer specs and electrical code requirements.
• Inverter and Charge Controller Wiring: Terminal connections on Victron, Schneider, SMA, and similar inverters demand careful torque control to ensure secure, code-compliant connections without cracking terminal blocks or stripping screw threads.
• Battery System Assembly: Bus bar connections, BMS terminals, and cell interconnects all benefit from repeatable, calibrated torquing to maintain safe, long-term conductivity.
• Electrical Panel Work: Breaker terminals, neutral bar lugs, and DIN rail hardware require a calibrated torque driver to protect both the equipment and the installer.
• HVAC and Controls: Terminal strip and sensor wiring in control panels require the low-end precision of the 7440’s 0.3-1.2Nm range.
• Electronics and Instrumentation: Small fasteners and sensitive housing used in these environments require the precision of the low-end torque drivers included in this set.

Frequently Asked Questions About the Wera 7440/41/42 Torque Screwdriver Set

What is the full torque range covered by this set? This set covers 0.3 to 6.0Nm across three drivers: the 7440 (0.3-1.2Nm), the 7441 (1.2-3.0Nm), and the 7442 pistol handle (3.0-6.0Nm).

How accurate are these torque drivers? Each torque driver in this set is accurate to ±6% in accordance with DIN EN ISO 6789, which is the internationally recognized standard for hand torque tools. You’ll receive both a tactile click and an audible signal when reaching the target torque.

Do I need any additional tools to change bits or adjust torque? No. Torque adjustment is done by hand directly on the driver. Bit changes happen with Wera’s Rapidaptor quick-release system. With this system, you can load and lock the bit without touching the sleeve, and you can eject the bit with a simple push forward.

What drive size do the bits in this set use? All bits use a standard 1/4″ hex head drive, making them compatible with any 1/4″ bit holder or adapter.

What bit types are included? The 27-piece set includes 9 TORX bits (T6-T30), 9 TORX Plus bits (6 IP-30 IP), and 6 Hex bits (2-6mm metric), all at 25mm long.

Can these torque drivers loosen fasteners? Yes. The loosening direction does not use the torque limiter, so you can use unlimited torque when removing seized screws.

Is this set appropriate for solar and battery storage installations? Absolutely. The 0.3-6.0Nm range covers the majority of torque specifications published by solar inverter, battery, and mounting hardware manufacturers. This is a purpose-fit torque driver set for professional solar and energy storage installers who need reliable, repeatable results on every connection.

Does the set come with a case? Yes. The complete 27-piece set is organized and stored in a durable, high-quality plastic case designed for job site use.