From: $569.00 $540.55
The SOK Battery Pack is PERFECT for applications such as Solar, RV's, Vans and many more projects where extended performance is needed. With a peak discharge current of over 100 amps, this battery can easily run lights, fans, and even a 1000w inverter. Multiple can be linked together to run even larger inverters (1000w per battery connected in parallel).
Save 5% by purchasing the battery in this kit. More details and technical specs on the SOK Battery can be found here.
While not required, these 4 stud bus bars serve as an excellent connection point for multiple batteries, loads, inverters, chargers, and much more. These will definitely clean up your electrical installation, making sure you look like a professional every time. With these you can avoid the safety risk of stripping out battery terminals by attaching too many cables under a single terminal...A loose connection can cause a fire and this 4 stud bus bar can help you prevent loose connections.
LiFePO4 Batteries require special charge voltages that some standard chargers struggle with. By pairing your SOK battery bank with this charger, you can ensure the battery is charged to the proper setpoints to provide you a full charge, every time. With up to 75 amps of charge current, this charger will reduce generator run time, and give you the peace of mind that your investment of batteries are charged by a top-quality battery charger like this one.
Note: If you are only using 1 battery, you will need to reduce the output current of this charger to 50 amps to prevent overloading the BMS (battery management system) within the battery.
The SOK Batteries utilize a M8 bolt, which works perfectly with a 5/16" Ring Terminal.
If you chose to use our 4 stud bus bars, those have a 3/8" ring terminal, in which case you should purchase the 3/8" to 5/16" cable set.
If you choose to utilize a fuse holder on your batteries, those will use 5/16" Ring Terminals.
The battery cables must be sized based on your application. For applications up to 60 amps, use 6awg, up to 120 amps use 2awg, up to 200a use 1/0.
If you need a greater selection of pre-made battery cables, check out our full selection here.