MPPT 450/200 + Silfab 440W Bundle

SKU: Unassigned

Victron MPPT RS 450V/200A SmartSolar Charge Controller

High-voltage solar charge controller for 48V battery systems with up to 450V DC PV input and independent MPPT trackers (2 on the 100A model, 4 on the 200A model). Each tracker supports up to 4,000W of PV, with MC4 connectors for direct solar string connection and full galvanic isolation between PV and battery.

Specifications:

  • Rated output: 100A (5,760W) or 200A (11,520W)
  • Max PV VOC: 450V DC, MPPT range 65V to 450V, 120V startup
  • Max PV per tracker: 4,000W / 16A operating / 20A short-circuit
  • Trackers: 2 (450/100) or 4 (450/200)
  • PV input: MC4 (one pair per tracker), battery: M8 studs
  • Communication: VE.Direct, VE.Can, Bluetooth
  • Parallel: Up to 25 units via VE.Can
  • Efficiency: 96% peak, operating temp -40°C to +60°C

Silfab Prime 440W 108 Half Cells N-Type Cell Solar Panel

The charge controller needs at least four panels to facilitate startup, and it’s possible to connect up to nine panels in series to each input. This gives 36 panels maximum.

Current Connected recommends an extra panel or two in case of damage from shipping, installation mishap, or an act of God.

Temporarily unavailable

LittelFuse MEGA Fuse – 250A for 48V Systems – 2 Pack

Specifications:

  • Pack of two (2) fuses - always good to keep a spare
  • Rated for 70Vdc - compatible with 12V, 24V, and 48V systems
  • 60A to 350A options available
  • Compatible with the MEGA Fuse Holder and Victron Lynx Distributor.
  • Interruption rating: 2500A @ 70Vdc
  • 1MΩ open state resistance @ 100V
  • Manufactured by LittelFuse

2/0 AWG Pure Copper Battery Cables - Red and Black

  • Set includes one black cable and one red cable
  • 100% fine stranded PURE COPPER cable for high amperage applications
  • Copper, tinned coated lugs
  • Polyolefin glue-lined heat shrink tubing
  • Cables are USA-made and assembled in-house utilizing a 6-point, 10 ton hydraulic press
  • Also available in: 6 AWG, 4 AWG, 2 AWG, 1/0 AWG, 4/0 AWG
  • Single Jumpers also available: 2 AWG, 1/0 AWG, 2/0 AWG, 4/0 AWG

Solar to Cerbo-GX Communication Cable: CAT5e RJ45 Cable

Specifications:

  • High-precision, CAT5e, ANSI/TIA-568-C.2 Compliant, ETL Verified
  • UTP 24AWG stranded conductors for flexibility and minimum crosstalk
  • 50-micron gold-plated contacts for high-speed data transfer and corrosion resistance
  • Molded, snag-less strain relief boots for long-lasting, durable connections
  • Compatible with Victron VE.Bus / VE.Can products

IMO 600V DC Disconnect Rooftop Isolator Switch, Solar Panel Disconnect for Rooftop or Ground Mount PV

The IMO SI32-PEL64R-X is a 600VDC / 32A rooftop DC disconnect switch for safely isolating solar panel strings during installation and maintenance. NEMA 4X rated with UV-resistant plastic, guaranteed arc suppression in 3ms, and available in 4-pole (2 string), 6-pole (3 string), and 8-pole (4 string) configurations.

Specifications:

  • Max current rating: 32A
  • Max voltage rating: 600VDC
  • Protection rating: NEMA 4X
  • Guaranteed arc suppression (3ms typical)
  • Operator independent switching mechanism
  • UV-resistant, self-extinguishing enclosure
  • Polarity independent
  • Available in 4, 6, and 8 pole configurations

10 AWG Solar PV Cable, Bulk 500Ft Spool of 103 Strand Red or Black XLP PV Wire, RHW-2 and USE-2 Applications

500 feet of 10 AWG solar PV Cable works in most residential or commercial solar systems. The cable is black in this kit, though red is also an option when purchased separately.

  • Type XLP PV Cable
  • Suitable for use as RHW-2 or USE-2
  • 90°C wet or dry insulation rating
  • Suitable for direct burial
  • Sunlight resistant
  • UL4703 Listed
  • 600VDC rated
  • .26" outer diameter

Note: Spool occasionally varies from wood to plastic. The spool may arrive slightly different than the picture, however, the wire will be identical.

Stäubli Classic MC4 & MC4-Evo 2 Connectors, Rated for 1100V and 35A, 5 Pair Bundle, Options Support 4.7mm to 8.8mm Wire Jacket Diameter

Stäubli’s MC4 and MC4-Evo 2 connectors are critical for any solar installation. They are the industry standard for solar connections. The Stäubli MC4 tool kit enables capability for IP68 rating and UL certification.

Specifications: 

  • Industry standard solar connector
  • Fits 12 AWG and 10 AWG PV wire with a total diameter (including insulation) between 4.7mm and 8.8mm depending on the model chosen
  • Package includes five plug ends and five socket ends
  • Stäubli Open-Ended Spanner necessary to unlock joined connectors
This product is currently unavailable.

Additional information

Victron MPPT RS 450V/200A SmartSolar Charge Controller

Weight N/A
Dimensions 21 × 16 × 9 in

Silfab Prime 440W 108 Half Cells N-Type Cell Solar Panel

Weight 61 lbs
Dimensions 69 × 44 × 2 in
Cell Type

Monocrystalline Half-Cut

Module Type

Monofacial (Single Sided)

Color

Black

LittelFuse MEGA Fuse – 250A for 48V Systems – 2 Pack

Weight .25 lbs
Dimensions 2.75 × .75 × .25 in

2/0 AWG Pure Copper Battery Cables - Red and Black

Weight N/A

Solar to Cerbo-GX Communication Cable: CAT5e RJ45 Cable

Weight N/A

IMO 600V DC Disconnect Rooftop Isolator Switch, Solar Panel Disconnect for Rooftop or Ground Mount PV

Weight N/A
Poles

4 Pole (2 String), 6 Pole (3 String), 8 Pole (4 String)

10 AWG Solar PV Cable, Bulk 500Ft Spool of 103 Strand Red or Black XLP PV Wire, RHW-2 and USE-2 Applications

Weight 30 lbs
Color

Black

Stäubli Classic MC4 & MC4-Evo 2 Connectors, Rated for 1100V and 35A, 5 Pair Bundle, Options Support 4.7mm to 8.8mm Wire Jacket Diameter

Weight 1 lbs
Style & Wire Outer Diameter

Classic MC4: 5.0-6.0mm, Classic MC4: 5.5-7.4mm, Classic MC4: 7.0-8.8mm, Evo 2: 4.7-6.4mm, Evo 2: 5.9-7.3mm, Evo 2: 6.4-8.4mm

Reviews

There are no reviews yet.